10mm 12v Pre-Wired Cool/Clear White LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 50)

Our pre-wired LEDs are nothing but quality. The 12v 10mm cool / clear white led puts out a nice color that is sure the illuminate your product or project. Our 10mm pre-wired leds have built in resistors so that they will work with the voltage that they are rated for. There is no need for you to add any additional resistors. The only thing you need to do is add power / ground and they will illuminate. It doesn't get much easier than that.The 10mm pre-wired leds come with a built in resistor, all connections are heat shrinked in order to protect them and there is sufficient wire lead on all of them.This single setup works well with the following voltages (you don't have to select a voltage when ordering): 10v, 11v, 12v, 13v, 14v and 15v. We recommend that you don't continuously run them at 15 volts, but they will take spikes as high as that without any issues at all. If you are looking for a lower voltage setup then take a look at our 9v or 6v setups that will cover the remainder of voltage ranges below 10v.

• 10mm 12v Pre-Wired Cool / Clear White LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v)
• Size: 10mm Round Top, Color: Cool / Clear White, Luminosity: 15,000-18,000 mcd
• Forward Voltage: 6-15v (15v not recommended continuous), Current: 20mA, Wavelength: N/A Cool White, Operating Voltage 6-15v (15v not recommended continuous), Wire Length: Approximately 15cm (6 inches)
• Viewing Angle: 20-30 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom
• Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, etc...